Test components for vehicle inspection equipment

Author：Web　Source：Web　Date：2018-07-25 11:23:00　Sentiment：41

Along with the progress of the request for the precision of goods in industrial production, the request for the precision of automobile production is also being continuously improved. At this time, automobile inspection tools are required. The measuring head position and view point of automobile inspection tools can be set arbitrarily according to the user's demand, the measurement process can be completed automatically, and the inspection data can be directly entered into the database. The flexible inspection system at the higher end has the function of error data analysis, and the data can be used to calculate the process control. So what are the inspection components of the car inspection? How should car inspection tools be maintained?

1. As for the main appearance of the parts, the active assembly can be used to check the flatness under structural constraints. Each active assembly has at least two catheters or guide posts. The movable block is quickly fixed with the equipment. The distance of the catheter or guide column is not less than 200 mm.

2. The inspection pin consists of three parts: guide, inspection and handle. In order to ensure the smooth inspection of the inspection pin, it is necessary to install the guide sleeve, and the guide sleeve and the inspection tool body are bonded together. According to the difference of hole, it is mainly divided into cylinder inspection pin and ellipsoidal pin edge pin (some of which are checked), and those who need anti-rotation shall cooperate with anti-rotation guide sleeve to use.

3. The section sample is used to check the type surface with installation request. The sample is made of excellent steel or hard aluminum plate with a thickness of 6mm. The structure is divided into rotary type and thrust type. Sample and check the parts for 3 mm, the gap between the section model should be placed in straight direction profile method, coordinate YiQu integer. Model bearing plate and the thickness of the section should be greater than 10 mm, when bearing is greater than 150 mm material thickness, should add height during 150 ~ 300 mm can be competitive, by adding stiffener bearing rigidity, when greater than 300 mm, support should be installed under the bearing pedestal. The section model on the fixture to secure, no looseness, and installation location, not to interfere in positioning pin and clamping device.

4. The stop-gauge (stop-rod) consists of a through-section, a handle and a stop-section. It is mainly used for checking the type surface.

As for which inspection components the car inspection has to share here today, the use of the vehicle inspection tools can be used to control the simplicity of various commodity scales (such as aperture, space scale, etc.) in automobile production, and improve the power and control quality of production.